top of page

63mm WRAS Approved Single Cold pipe for cold water services. 


Carrier pipe: 63mm OD, 51.4mm internal bore, 16 BAR rating

140mm fully insulated insulated outer duct 


1) Select the insulated duct size you require (for some pipe sizes there is only one option).

2) Select the length you require.

3) Select whether you require pipe only or pipe & fittings kit (includes dust caps for the duct, terminal connections and fix points to 2" BSP male thread).

4) Select whether you require heatshrink end caps on one or both ends of the duct. If the end of a duct will not be terminated above ground in a weatherproof structure then these will be required.


Shipping costs are dictated by pallet space required and will be calcuated at checkout.


Pipe Spec:

  • Carrier pipes: HDPE (PE100)/SDR 11/PN16
  • Fluid operating temperature range: from – 10 °C up to + 20 °C
  • PE-X insulation foam: < 1% water absorption in accordance with ISO 2896
  • Maximum length available per single coil, all dimensions: 100 m
  • Designed in accordance with European standard EN 15632-3
  • CFC-free production process


Cut to length orders are not returnable or refundable.

Full tech specs and installation instructions can be found in the technical manual (available to download on the tech specs tab).  All information provided in the technical manual takes priority over the product information shown above.  

All products must be installed as detailed in the technical manual.


Call 0333 577 0210 if you require any advice or assistance.

63mm Single - Cold

Excluding VAT
  • Our 10, 15 and 20 mtr packs can be returned unopened and in resaleable condition - buyer pays return postage.  Unfortunately cut to length orders are not returnable.

bottom of page