ISOFLOW 63mm Single Pipe for Hot Water Services (DHW) - WRAS Approved - Internal bore 45.6mm.
- Standard 140mm and super insulated 160mm duct options available.
- Select the length you require - 5m to 100m
- Fittings are the brass clamp type (no special tooling required) and convert the durable pex-a pipe to 2" male BSP.
- Heat shrink end caps cover the exposed insulation at the ends and prevent water ingress - recommended on all runs but imperative if ends are external or underground.
Key Product Features (full specification and installation instructions can be found on the 'tech specs' page):
- Designed in accordance with BS15632-1&3
- Carrier pipe: PE-Xa/SDR 7.4/PN10: Internal bore 45.6mm.
- Continuous operating temp 70°C, Max 95 °C for limited period.
- PE-X insulation foam: < 1% water absorption in accordance with ISO 2896
- UV resistant corrugated outer duct
- CFC-free production process
Shipping costs are dictated by pallet space required and will be calculated at checkout. Please note cut to length product is not returnable for credit. Visually the product may vary (pipe colour etc) but technical performance remains consistent.
Please call 0333 577 0210 if you require any advice or assistance.